Buy USDT
Last updated
Was this helpful?
Last updated
Was this helpful?
You can now buy USDT in MDAO Telegram Wallet for rubles! Enjoy using this convenient feature and don't waste your time on numerous transactions on other services.
We'll show you step-by-step how to buy USDT for rubles through our MDAO Telegram Wallet.
To buy USDT for rubles, you need to undergo a KYC procedure. If you have already completed the procedure in MDAO Telegram Wallet (for other features), you will not need to pass it again.
Head over to MDAO Telegram Wallet and tap Start or enter the /start command manually.
Read the welcome message and related information.
You can proceed to purchase USDT through the main Menu, through the Cards section or by using the Buy USDT button.
The KYC (Know Your Customer) procedure is about identification and establishing a customer's identity in order to obtain information about them as a person with whom interaction is carried out. Verification is carried out to check suspicious behavior and eliminate the risk of fraud on the part of the counterparty.
Have the document you want to use for KYC ready in advance and keep it nearby. You will need 5-10 minutes for the whole procedure.
Our partner service OnDato only validates state-issued documents. Make sure your document meets these requirements.
You can use the following documents to pass KYC:
Passport: new-type domestic passports, as well as passports with MRZs (Machine-Readable Zones).
ID cards
Driver's license
The documents must be valid at the time of KYC.
To pass KYC, tap on Pass KYC in the USDT purchase section and then again from the message describing the procedure.
Follow the link, or copy the link and navigate from a supported browser, and follow the on-screen prompts.
Follow the link, or copy the link and open it in Chrome (for Android) or Safari (for iOS).
Read the regulation on the processing of personal data by the service and tap I Agree to continue, or Disagree to cancel and return to the menu.
Select a document, prepare the main page of the document to take a photo, and on the next page, tap Start.
When passing KYC with your passport:
position the document in the highlighted area on the photo
the MRZ zone should be under the white-gray dashed line
When passing KYC with an identification card (ID) or driver's license:
two photographs will be required - the front of the document and the back of the document
the front part of the document is photographed first (Side 1)
then, after tapping Continue, you have to take a photo of the back of the document (Side 2).
General advice:
when photographing the document, there should be no glare, backlighting, or other objects falling within the field allocated for the photo
the photo should not be dark, blurred, or small scale
the text of the document should be readable
in case of insufficient lighting, use an additional light source to improve the image quality, or take photos in natural light.
Provide access to your camera if required.
Expand the document and frame it as shown in the screenshot, take a photo and if the photo is of good quality, tap Capture.
Check the quality of the photo and tap Continue.
If you want to rephotograph the document, tap Try Again.
Tips for selfies:
use your smartphone's front camera
your face should be in the frame, and the frame of your face should match the highlighted frame as much as possible
keep a neutral expression on your face
at the moment of taking a photo, the service will prompt you what actions to take: move your face closer to the camera or farther away (when the frame narrows or widens)
try to take the photo in a well-lit room or in natural light
make sure there are no bystanders within the camera's view
the photo should not be blurred
Tap Start to proceed to taking selfies.
Position your face in the photo frame and follow the on-screen prompts.
After taking a photo, do not minimize or close the window, your photos are being processed by the service.
Wait until the photo is fully processed, this process may take a few minutes and is accompanied by a progress bar in percentages.
Once you see the confirmation that your KYC is complete, you can go back to your wallet. The screen should say “Your verification is completed”!
If the identification fails, you will receive a notification about it on the screen.
You can try again within the current session only 3 times. Then the current session will expire.
You will not be able to repeat the KYC procedure until 2 hours after the session has been updated.
Take your time, make sure you do everything according to the recommendations and repeat KYC from the beginning, starting from the transition to the section where verification is required (the KYC link will change, which means that the previous session was reset and can be repeated).
Email support at support@daomars.com if you need help.
After completing KYC you can navigate back to your wallet, the bot will notify you with a private message of successful completion.
Tap Next to purchase USDT.
You have completed identity verification and the purchase is available in the wallet. In the USDT purchase section tap Buy USDT.
You can buy from 50 to 5000 USDT per transaction. When you make a purchase, you receive USDT in BNB Smart Chain (BEP-20) to your wallet in the bot.
Select or manually specify the purchase amount and click Pay.
An order will open with details of where to send the rubles.
Please keep track of the transfer time, as the order will be canceled after the specified time has expired.
Copy the details and send the exact amount of rubles you see in the order.
After completing the transfer and updating the order, you will receive a message in the bot about successfully depositing USDT.
You can see your USDT by requesting the current balance via the Wallet button.
